Facebook
Категории
Категории

Timber Screws vs Lag Bolts: Why Are They Replacing Lag Bolts on Decks and Pergolas?

by Tianyu Fasteners
Nov 16th,2026 8 Взгляды

Timber Screws vs Lag Bolts: Why Are They Replacing Lag Bolts on Decks and Pergolas?

Timber screws — also called timber bolts — are used in wood-to-wood structural work: decks, fences, pavilions, pergolas, guardrails and more. Their deep 6-lobe star drive recess drives fast and clean, which cuts installation time sharply compared with a traditional lag bolt.

How do timber screws compare to lag bolts?

Tianyu timber screws are structural replacements for many lag bolt and structural nail applications. Their deep threads engage more wood fibres than a traditional lag bolt, which often delivers comparable — or higher — withdrawal (pull-out) values.

Feature

Tianyu timber screws

Lag bolt

Pre-drilling required

No

Yes

Washer required

No

Yes

Drive style

T40 star drive

Hex head

Why use a timber screw instead of a lag bolt?

A lag bolt takes four steps: drill a pilot hole, drill a clearance hole, add a washer, then drive the bolt. On a large project with hundreds of connections, that eats hours. A timber screw has a sawtooth point and deep threads that eliminate pre-drilling without giving up strength or holding power — so the same joint goes in, in one step.

Are they corrosion-resistant?

Yes. Our timber screws carry a double-barrier coating that delivers corrosion protection comparable to hot-dip galvanising, which makes them suitable for outdoor work and for use with preservative-treated timber. They come in tan to blend with the timber for a discreet finish, or black for a clean, defined look.

For high-corrosion sites — coastal areas in particular — they are also available in stainless steel.

Do I need a special drill bit?

No. These screws install with a standard T40 6-lobe star drive bit. Each pack includes a bit; the single-screw option does not.

What sizes are available?

  • Shank diameter: 5.6 mm (0.220")
  • Head diameter: 19.3 mm (0.76")
  • Length: 75–250 mm in tan; 75–400 mm in black

Can they be used for structural wood connections?

Yes. Tianyu timber screws are built for heavy-duty wood-to-wood connections and are suitable for many structural fastening applications.

What we manufacture

Tianyu Fasteners produces timber screws for structural wood-to-wood work — T40 star drive, sawtooth point, deep thread, double-barrier or stainless finish — to DIN / ISO standards, with MTC on request. Tell us your connection and exposure and we will spec the length and coating. OEM and private-label ready, with flexible MOQs.

FAQ (for buyers and procurement)

Q: Timber screw or lag bolt — which is faster? A: The timber screw. It skips the pilot hole, clearance hole and washer, so the joint is a single driving step.

Q: Which coating for coastal projects? A: Stainless steel. For general outdoor and treated timber, the double-barrier coating performs like hot-dip galvanising.

Q: Can you supply lengths outside the standard range? A: Yes — send the drawing and we will produce to length, with the drive and coating you specify.

Q: What is the minimum order? A: Trial batches and full container loads are both welcome. MOQ is flexible per type.

Q: What are the lead times? A: Stock grades ship in 2–3 weeks; custom runs in 4–6 weeks after sample approval.

Contact us now for samples: support1@tianyufasteners.com. Explore our offerings at www.tianyufasteners.com.


Author: Song
Song focuses on product quality and works with our factory to deliver reliable fasteners European buyers can trust. He enjoys helping customers find the right screw and is passionate about a great experience with Tianyu Fasteners.