Washers are small, but they do a big job: spread load, protect surfaces, reduce loosening, and make bolts, screws and nuts perform better. Building a deck, anchoring steel, assembling equipment or just repairing something — the right washer makes the connection cleaner and stronger.
A washer is a thin plate, usually round, with a hole in the centre. It sits between the fastener head (or nut) and the material, distributing pressure and protecting the surface from damage.
|
Type |
What it does |
Where it goes |
Standard |
|
Flat washer |
Spreads load over a larger area; stops the head digging in |
General fastening, wood, metal assemblies |
DIN 125 |
|
Fender washer |
Larger outside diameter for extra bearing surface |
Thin sheet metal, oversized holes, soft materials |
DIN 9021 |
|
Split lock washer |
Cut and twisted to add tension and resist vibration loosening |
Machinery, equipment, metal assemblies |
DIN 127 |
|
Structural washer |
Thicker, stronger, for high-load steel bolting |
Steel framing, structural connections |
EN 14399-6 |
|
Finishing washer |
Countersunk shape so a flat or oval head sits neatly |
Trim, cabinetry, furniture, visible fixings |
— |
|
Sealing washer |
Rubber / neoprene / EPDM insert creates a weather seal |
Metal roofing, siding, exterior panels |
— |
|
Square washer |
More coverage and resistance to pull-through |
Timber connections, post-and-beam, heavy wood |
DIN 436 |
Tianyu Fasteners produces flat, fender, split lock, structural, finishing, sealing (EPDM) and square washers — in carbon steel and stainless, zinc-plated, hot-dip galvanized or RUSPERT-coated, to DIN / EN standards, with MTC on request. Tell us the bolt, the material and the exposure, and we will match washer, coating and size. OEM and private-label ready, with flexible MOQs.
Q: Which washer for a metal roof? A: A sealing washer with an EPDM insert — it seals the hole and stops water tracking under the head.
Q: Which washer for a structural steel connection? A: A structural washer to EN 14399-6 — thicker and stronger than a standard flat washer.
Q: Zinc or stainless? A: Zinc for dry indoor work; hot-dip galvanized for general exterior; stainless (A2/A4) for coastal or harsh environments.
Q: Can you supply washers matched to our bolts? A: Yes — send the bolt spec and we will match hole size, outside diameter and thickness.
Q: What are the MOQ and lead times? A: Trial batches and full container loads are both welcome; stock grades ship in 2–3 weeks, custom in 4–6 weeks after sample approval.
Contact us now for samples: support1@tianyufasteners.com. Explore our offerings at www.tianyufasteners.com.
Author: Song
Song focuses on product quality and works with our factory to deliver reliable fasteners European buyers can trust. He enjoys helping customers find the right screw and is passionate about a great experience with Tianyu Fasteners.